传统火灾系统cp1000 多线消防报警主机 4/8/16区火警控制面板 FACP
灰色版传统8回路多线制火灾报警控制器，配接任何2线烟感（YT102，YT102C等）温感.
概述：
传统4/8/16回路火灾报警控制面板
主要规格/功能参数
4/8/16报警显示，2路声光输出，
每个回路可接 两线烟雾探测器和 任何常开触点的设备
供电电压 AC110-270V 输出电压24V。
需要备电 :两节 7AH/12V
故障显示 测试按钮 消音按钮 复位按钮
The cp1000 is a 4/8/16zone FACP (Fire Alarm Control Panel), which uses conventional input devices. The panel accepts water flow devices, two-wire smoke detectors,
four-wire smoke detectors, pull stations and other normally-open contact devices. Outputs include four Notification Appliance Circuits (NAC, SOUND1-2), three standard Form-A relays (alarm, trouble and supervisory) and an EIA-485 port to interface with remote
annunciators and optional remote relay modules. The FACP is field programmable via the panel keypad. It also supervises all wiring, AC voltage and battery level.
This series of panels are basically the same in application and operation, their differences are shown in Table 1-1. HP101 will be described as the example in the following
sections.
Table 1-1
|
FACP
|
Number of Detection Zones
|
Number of Sounder Outputs
|
Output Delay Settings
|
|
Cp1004
|
4
|
2
|
N/A
|
|
Cp1008
|
8
|
2
|
N/A
|
|
Cp1016
|
16
|
2
|
N/A
|