日本ASKER橡胶硬度计F型_相关信息_深圳市腾明达精密仪器有限公司

产品名称: ASKER ASKER海绵硬度计
产品型号: F
产品展商: 深圳市腾明达精密仪器有限公司
简单介绍
ASKER橡胶硬度计测量硬度的基本因素之一是确定不同橡胶、人造橡胶及塑料制品的特性。适合特点的设计，所有的硬度计的生产及校准都是在专业人员的严格控制下进行的，可以保证并符合国内及国际标准.深圳市腾明达精密仪器有限公司代理日本高分子ASKER橡胶硬度计中国总代理.产品库存量大.技术全面.提供五年质量保证及所有零配件及维修服务.联络电话/29813810

ASKER的详细介绍

ASKERDurometer Type F

The ASKER Durometer Type Ffor much softer specimens (low hardness) gives accurate readings asit features a larger indentor and pressurefoot.

The durometer exclusively for various foam materials such asurethane foam, sponge, etc.

There is no need to press the durometer into the specimen, butjust to place it onto the specimen. As it is soft, the weight ofthe durometer constitutes the pressure to the specimen.

Features

Indentor

Height: 2.54mm Shape:Cylindrical

Pressure foot

The pressure foot in contact with aspecimen is 80mm in diameter, wide enough to offer a stablemeasurement by placing it onto the specimen.

Hardness TesterSelection Chart

Our product line consists of varioustypes of durometers applicable to specific materials
as indicated in the chart above.

Type A Durometer (ASKER A type), conforming to JIS K 6235 is themost popular type of durometer for measuring rubber hardness.

However, verification is recommended because a significantdifference is estimated to be the largest when a durometerindicates measurement values from 10 to 90 points.

For hard specimens for which Type A Durometer readings indicatemore than 90 points, measurements should be undertaken using theType D Durometer (ASKER D type). However, for soft specimens withmeasurements of less than 20 points, the ASKER C type or Type EDurometer (ASKER E type) should be used. The most importantconsideration in using durometers is to select the correct type forpurposes of measurement according to the specimen.

Specification

Indicationrange

0 point - 100 point (262 degree dialscale)

Minimumindication

1 point (Accuracy : ±1 point)

Indentor Design(mm)

Height: 2.54 25.2 Dia. Cylindrical

Spring Forces[mN(g)]

0 point:

539(55)

100 point:

4460(455)

Central hole ofdiameter of Pressure foot

Φ26

Pressurefoot
Dimension (mm)

Φ80(Round shape)

Outer Dimension(mm)

Approx. Width 80×Depth 80×Height 81

Weight(g)

500

Application

Urethane foam
Sponge
Nonwoven fabric