刮刀下部卸料离心机SG/SGZ系列

产品特点与用途：
       本机为三足式刮刀下部卸料、间歇操作、程序控制的过滤式自动(手动)离心机，可按使用要求设定程序，由液压、电气控制系统自动完成进料、分离、洗涤、脱水、卸料等工序，可实现远、近距离操作：该机采用窄刮刀低速卸料，因此除广泛用于含粒度0.05—0.15毫米固相颗粒的悬浮液分离外，特别适宜热敏感性强，不允许晶粒破碎。操作人员不宜接近的物料的分离。该机具有自动化程度高、处理量大、分离效果好、运转稳定，操作方便等优点。
    The machine is a tripod filter progam—control auto centrifugal machine that unloads from the bottom with scrapers．It operates intermittently The program can be set according to the demands．The machine can finish automatically feeding，separating，dewatering，unloading and other process with hydraulic system，electric control system It can carry out close or distance operation．The machine adopts unloading at low speed with narrow scrapers．It iswidely used in separating suspension whose grain size is O.05—0.15mm it is also suitable for separating materi—
als whose heat sensitivity is strong．its crystal is not broken and the operator may not be near The machine has advantages，such as high automation，large treatment volume．good separating result，steady running，xonvenient operation and others.
结构与原理：
       调速电动机带动转鼓中速旋转，进料阀开启将物料由进料管加入转鼓，经布料盘均匀洒布到鼓壁，进料达到预定容积后停止进料，转
鼓升至高速旋转，在离心力作用下，液相穿过滤布和鼓壁滤7L排出。固相截留在转鼓内，转鼓降至低速后，刮刀旋转往复动作，将固相从鼓壁刮下由离心机下部排出。
 
    The governor motor drives the tumbler to rotate at middle speed The feeding valve opens and the materials enter the tumbler through the
feeding pipes The materials are spread even on the tumbler wall．When the materials reach the preset volume，the feeding stops The tumbler rises
to high speed．The liquid passes through the filter cloth and discharges from thd tumbler wall holes under the function of the centrifugal force The solid remains in the tumbler When the rotational speed reduces to low speed．the scrapers rotate over and over again to scrape the solid down
from the tumbler wall and discharge it from the bottom of the machine。

主要技术参数：