刮刀下部卸料离心机SGZ（GMP）系列
主要特点 Main features
1．采用PLC控制，程序设定，无人看护的自动化操作，加料、初过滤、洗涤、精过滤、卸料全过程监护。2变频调速，启动平稳，分离因数可调。3．能耗制动，非接触式制动方式，无磨擦粉尘污染。4全密闭结构，密封件采用硅橡胶或氟橡胶，离心机内腔氮气保护，可实现密闭防爆要求。5结构设计合理，在线清洗系统(喷淋系统)，保证了洁净度要求，符合GMP规范中对设备的要求。6．自动动作元件采用气动系统，清洁卫生。 7.射频导纳料程控制。8．选装气体辅助刮刀，卸料后转鼓中无残余滤饼。9．无基础安装，结构简洁，外形美观，清洗方便。10．安全保护：转速检测，过振动保护，开盖保护，电机过载过热保护，刮刀旋转，升降机械电气双重控制，刮刀与转鼓的联动锁定。
1．PLC control is applied with programs which can be designed，automaticoperation can be realized even without worker at the physical field．Feeding，preliminary filter，washing，precise filter,discharge can be super vised during the full procedure．
2．Started by frequency modulator，the start of the machine is stable，the separation coefficient is adjustable。 3．Power consumption brake，non-contact type brake mode，no frictional powder pollution· 4．The full sealing parts have applied silicon rubber or fluorine rvbber．Nitrogen protection system is applied in the inside part Of the centrifugal machine，sealing and explosion prevention requirements can be realized· 5．Reasonable structure design，0n line washing system(spraying system)guarantee the clean extent requirement and GMP norm can be corresponded to． 6．Pneumatic system has been applied in automatic operation parts to keep sanitary and cIean. 7．Frequency emission material procedure control. 8 Pneumatic auxiliary scraper can be chosen，there is no remaining jam in the rotating drum after discharge. 9 Non foundation instaIIation，concise structure，beautiful appearance，convenient washing and cleaning. 1O．Safety protection：inspection of rotational speed，over vibration protection，protection for discovering，over charge or over heat protection of the motor，double electrical control for rotation Of scraper and lift machinery，combined lock for the scraper and rotating drum。
主要技术参数：
|
型号
|
转鼓 |
分离因数(w2r/g)
|
电机功率（kw） |
整机重量 kg
|
外形尺寸
mm
|
|
直径
mm |
壁厚mm |
工作容积L |
装料限量kg |
转速r/min |
|
SGZ800（GMP） |
800 |
6/8 |
115 |
150 |
1200/1500 |
645/1008 |
7.5/11 |
1800 |
2150*1650*2050 |
|
SGZ1000(GMP) |
1000 |
8/10 |
175 |
250 |
1000/1200 |
560/806 |
11/15 |
2800 |
2350*1850*2200 |
|
SGZ1250（GMP） |
1250 |
10/12 |
400 |
530 |
960/1050 |
645/770 |
18.5/22 |
3800 |
2520*2000*2350 |
标准制造形式Standard Manufacturing Form
1结构：外壳配置进料管、洗涤管、观察镜、排气口、检
修孔、照明孔；密闭结构，转鼓及外壳、翻盖等部件为
不锈钢材料(SUS304)制造。机座等为铸造件，表面包
衬不锈钢。转鼓、外壳内外表面、机器外露件表面均封
光处理。
2所有紧固件为不锈钢件。
3采用PLC控制。
4机电式料程控制。
5传动与制动：普通电机(或防爆电机)+变频器+能耗制动.
6气动系统。
1．Structure：Feeding pipe，washing pipe，observa—
tion window．exhaust hole，inspection＆repair
hole，lightening hole have been applied in the
turning over cover of the outshell．The sealing
structure，rotating drum and outshell，turning over
cover are all made of stainless steel(SuS304)，
machine chassis parts are made of cast material，
the surface is covered with stainless steel．The
rotating drum，inside and outside surfaces of the
outshell，the exposed parts of the machine have all
been polish treated．
2．All tightening parts are made of stainless steel．
3．PLC control is applied．
4．Electrical material procedure controI．
5．Transmission and brade：normal motor(or
explosion prevention motor)+frequency
modulator+power consumption brake．
6．Pneumatic system．
选装配置 Device for choice
清洗喷淋系统。
氮气保护系统。
射频导纳料程控制。
触摸屏控制。
液压动作系统。
气体辅助刮刀。
无基础形式(配置隔振底盘+减振器)。
按用户所分离物料的防腐要求采用相应的不锈钢材料
(SUS304、316、316L、321、钛材等)。
Washing&cleaning spray system
Nitrogen protection system
Frequency emission material procedure control
Touch screen controI
Hydraulic operation system
Pneumatic auxiliary scraper
Non foundation form(supplied with vibration separation
chassis+vibration reduction device)
Choose the corresponding stainless steel(such as
SUS304，316，316L，321，TA2)according to the customer’s erosion proof
requirement for separated material．