上海醇酸磁漆生产厂家 醇酸磁漆产品说明

产品说明 Description

醇酸磁漆IS50是一种耐候、光泽良好且具有保色性的醇酸磁漆。漆膜柔韧，耐海水，矿物油及其他脂肪烃类物质。

同时，还可耐水冷却区表面的温度。
Alkyd enamel IS50 is alkyd enamel with weather-resistance, good gloss and color retention. It is flexible and resistant to salt water, mineral oil and other aliphatic hydrocarbons. It withstands temperatures as normally existing on water-cooled blocks, etc.

主要特性 Outstanding Characteristics

1.  作为通用面漆，用于中等腐蚀性环境下的钢板或木结构的内、外表面涂布。
2.  作为机房（包括主机及辅助机械）的面漆。
3.  作为机房及类似区域的舱顶面漆。
1. As a general purpose-finishing coat on interior and exterior steel and woodwork in moderately corrosive environment.
2. As a finishing coat in engine rooms, including main engine and auxiliary machinery.
3. As a finishing coat on tank tops in engine rooms and similar areas.

技术数据 (Technical Data )

漆      面:                                       有光                                  见“备注”
Finish:                                            Glossy                                See remarks

颜      色:                                      白色                            黑色         (可按需求提供其它颜色)
Colors:                                          White                         Black      (other color depending on requirement)

体积固体含量:                           约49%                          约44%
Volume solids:                            Approx. 49%                   Approx. 44%

理论涂布率:                            约16.3米2/升                     约14.7米2/升           (以30微米干膜计)
Theoretical spreading rate:       Approx. 16.3 m2/L           Approx. 14.7 m2/L   (30 micron dry film thickness)

耐  温：                                                      （干燥）：120℃
Temperature resistance:                               Maximum (dry)：

闪  点:                                                              38℃
Flash point:

比  重:                                                        约1.1千克/升                      约0.9千克/升
Specific gravity:                                          Approx. 1.1 kg /L             Approx. 0.9 kg /L

指 触 干:                                                 6-8 小时        20 ℃
Dry to touch:                                              6-8 hours

施工详述 Application Details

施工方法:                                无空气喷涂                         空气喷涂                        刷涂
Application method:                  Airless spray                 Air spray                   Brush

稀释 剂:                                  TH98                          TH98                        TH98
Thinner:

用量:                               5%                            15%                         5%
Max. Vol.:

漆膜厚度:                              湿膜: 75  微米                    干膜: 30  微米
Indicated film thickness:          Wet: 75 micron                Dry: 30 micron

重涂间隔:                             最小: 8小时 20 ℃                  : 5天  20 ℃  见“备注”
Recoat interval:                      Min: 8 hours                  Max.: 5 days          See remarks

施工条件:                       按照正常要求的良好条件进行。在狭窄空间施工和干燥期间，应大量通风.
Application conditions:     As   dictated  by  normal  good painting  practice.  In  confined  spaces  provide  adequate 
                        

                                                   ventilation during application and drying.

                                               上海日神精细涂料有限公司ISO9001认证企业