一、用途及特点
    本机用于编制地毯、簇绒毯，连续块毯上胶发泡压在烘燥定型、各种类毛毯和地毯的上胶拉幅烘燥定型。本机根据国外地毯生产机型，采纳其优良特点经优化设计，其机械结构设计灵活，运行可靠，能适应各种织物，电气控制根据我国较先进的控制原理及用户使用要求自行设计配套。
二、主要规格及工艺数据
    外形尺寸：A,长X宽X高 43.06X4.5X3.65M
    （外标配置）（五节烘箱2.5M门幅）可根据用户要求重新配套组合
    B,发泡平台2800X600X2500MM
    C,进布机段8300X2800X2500MM
    D,预烘区2800X1200X2500MM
    E,出布落布机架2800X600X2500
    (根据要求有所变更)
    F,压花区2800X4300X3650MM
    2.机械设计速度：1~5米/分，变频调速
    3.加热方式：蒸汽加热0.6~0.7MPa（蒸汽压力）油加热，热风加热，蒸气加电加热，燃气直接加热
    4.烘燥型式：热风强制循环喷嘴式
    5.全机耗电总功率：A,55千瓦左右（五节）传动风机功率B，预烘红外辐射功率6X6=36KW
    6.全机总重量：28T左右

Main specifications and technological data

1.Overall diension: a 43.06(L)*4.5(W)*3.65(H)M(Standard configuration )(5 sectional drying oven,2.5M wide)New combination can be provided according to cudtomers re-quirement
                            b.Fonming platform 2800*600*2500 mm
                            c.Entry zone 8300*2800*2500 mm
                            d.Predrying zone 2800*1200*2500 mm
                            e.Delivery plaiter at exit zone 10000*4300*3650 mm
                           (Varied according to requirement)
                           f.Embossing zone 2800*600*2500 mm
2.Design mechanical speed:1-5m/min,Ferquency conversion sp-eed changing
3.Heating form:Steam heating0.6-0.7MPa(Steam pressure )oil
heating,hot air heating ,steam plus elect ric heating and gas direct heating.
4.Drying form:Hot air forced circulation jet spraying mode
5.Total consuming power: a.bout55KW(5 sections)driving po-wer of fan.
                                             b.Infrared radiation power for pre-heating 6*6=36KW
6.Total weight :about 28T