落地镗床工作台是最常使用的机床工作台之一，它包括落地镗床工作台，落地铣床工作台等。高强度铸铁HT200-300 ，工作台硬度为HB170-240 ，经过两次人工处理，（人工退火600度-700度、自然时效2-3年）使用该产品的精度稳定，耐磨性能好
Floor-type Boring Machine Worktable is one of the the most commonly used machine tool worktable, which includes boring machine worktable and milling machine worktable.
The material of is high-strength cast iron HT200 and HT250. After two times’ artificial heat aging treatment( Artificial annealing temperature 600℃ to 700℃or 2-3 years natural aging) the internal stress was totally eliminated, so the surface plate have stable accuracy and good wear-resisting performance.
落地镗床工作台用途：主要用于机床加工工作平面的使用，工作台上面有孔和T型槽，用来固定工件，和清理加工时产生的铁屑。常用机床工作台：落地镗床工作台、镗铣床工作台。
落地镗床工作台主要用于坠地镗床、铣床、镗铣床配套，机床加工工作平面使用，上面有孔以及T型槽，用来固定工件，以及清理加工时产生的铁屑。常见的机床工作平台如：落地镗床工作台、龙门铣床工作台等。
落地镗床工作台具体适用于机械、发动机的动力实验，设备调试，具有较好的平面稳定性和韧性，表面带有T型槽，可以用来固定实验设备；同时适用于各种产品的检验工作，铸铁平台。同时应用于精度测量用的基准平面，机床工作台,铸铁机床平台还用于机床机械检验测量基准，机床工作台用于检查零件的尺寸精度或行为偏差，并作精密划线，在机械制造中也是不可缺少的基本工具。
Usage:
Boring machine worktable is mainly used to match with floor-type boring machine, milling machine, boring and milling machine and machine tool working plane, on which working surface there are holes and T slots to fixed artifacts and to clean process of scrap iron.
Floor-type boring worktable is often used in many fields, such as machinery and engine testing, equipment debugging and it has stable flatness and toughness. It is with T slots, so it an be used to fixed laboratory equipment It can be used as the datum for measurement of the machinery parts’ geometric tolerance,such as flatness, parallelism, straightness and more. It is also can be used for precision inspection, marking out (layout), and tooling setup.Measuring Surface Plate is the indispensable basic equipment in most mechanical manufacturing industries.
落地镗床工作台安装常识：分别为平台支架安装，地锚器安装、垫铁安装、地脚螺栓安装。地锚器安装：镗床工作台可以设计地锚器安装，首先用户根据工作台平台的图纸做好地基和预埋孔，然后把地锚器放到提前设置的预留孔里，将铸铁平台调整水平。
垫铁安装：铸铁平台调至水平、负荷均匀分布于各支点上。
Installation common sense:
There are four installation devices, that is supporting stand , anchor devices, pad iron and foundation bolts.
Installed with Anchor devices:
The foundation and embedded holes should be created according to the drawings before mounting the anchor devices.Mounting the anchor devices into the embedded holes and leveling the worktable.
Installed with pad iron:
Leveling the worktable with pad iron and make the load evenly distributed on the points.