万灵霸T-16润滑油添加剂为100%石油基，通过加拿大高新化学工程技术研制而成，是专为提升常规润滑油性能而特别研制的润滑油添加剂。经常使用万灵霸润滑油添加剂能为您带来以下效益：
LIQUID BEARING T-16 Lubricant Treatment is a 100% petroleum-based, chemically engineered lubricant additive package that is designed to improve the performance of regular lubricating oils. Regular use of LIQUID BEARING Lubricant Treatment provides:
·Extreme load-carrying ability with maximum lubricant performance under severe duty conditions
·因产品具独特抗磨性能，即使是在极端负载条件下也具有超凡的润滑性能
·Enhanced detergency/dispersion to keep oils clean, increasing power and performance
·高效清洁，可加大马力和提高性能，延长设备使用寿命
·Resistance to lubricant acidity, sludge formation and fluid breakdown
·能有效防止润滑油酸化，油泥形成和油体分解，具强力抗腐蚀及防锈功能
·Longer service intervals between oil changes
·能延长换油周期，具良好氧化安定性
·Increased equipment reliability when used with a structured maintenance program
·遵循有条理的保养计划可提高设备的稳定性
·Compatible with all petroleum and synthetic based oils – Can be used in areas where petroleum based lubricants are already being used
·兼容所有石油和合成基础油—适用于所有使用石油基润滑油的设备
·Non-corrosive – Does not contain plastic particles, PTFE, Molybdenum Disulfide, Graphite or Lead, and will not harm standard gaskets and seals
·无腐蚀性，不含塑料颗粒，PTFE, 二硫化钼， 石墨及铅，不会损害标准垫片和密封物。不含任何纳米金属粉，不会有堵塞管道的后遗症。
Liquid Bearing T-16 Lubricant Treatment is recommended for use in all general applications requiring lubricating oils.
万灵霸T-16润滑油添加剂适用于所有的使用常规润滑油的设备
Drain intervals are subject to operating conditions and maintenance practices. Therefore, monitoring by oil analysis is recommended. For best performance when using Liquid Bearing T-16 Lubricant Treatment, it is recommended that an initial treatment of 5% by volume of Liquid Bearing T-16 Lubricant Treatment be added to the oil reservoir and the component allowed to operate for a minimum of 72 operating hours prior to a scheduled oil change to allow built-up sludge and contamination to be removed with the old oil.
换油周期取决于机械的运行条件和维修方法。因此，监测分析油样尤其重要，为了达到的使用效果，次使用万灵霸T-16润滑油添加剂要在设备预期换油前72小时将5％添加剂加入油箱，待运行至少72小时可清除内藏的积碳和污泥，然后及时更换旧油及旧滤网，再加入新油。
For regular use, add 5% of Liquid Bearing T-16 Lubricant Treatment to the oil reservoir and then fill with regular lubricating oil to the recommended oil fill level. Follow regular oil change schedules and routines when changing oil.
换油后，再添加5％的万灵霸T-16润滑油添加剂到油箱内，便可持续使用，如果是较旧的设备则应对滤油网多加注意，以便及时将内藏未清除完的积碳清理，需定期换油。
