QAEJ系列电机/MQAEJ系列电机/QAD系列电机
M2QA-W户外系列三相异步电动机适合使用在户外环境条件之下，电机选用优质材料、特殊的加工工艺，在合理的维护条件下,可延长电机的使用寿命。
1、电机符合下列标准
国际电工委员会IEC34、IEC72
澳大利亚标准AS1359-2
英国标准BS4999-5000
德国标准DIN42673
符合欧共体 “CE”标记要求
电机符合GB755（idt IEC 60034-1)、GB10069(neq IEC 60034-9)、Q/JBQS28
2、优越的电机性能
低噪音、低振动
通过优化设计及工艺的改进,QA系列电机在噪音、振动有了大幅度降低并达到国际先进水平。
高性能的防护等级
电机的标准设计防护等级为IP55,可按客户要求提供更高要求的防护等级。
适用宽电压使用
电机设计考虑了不同地区的电压变化,使电机适应多个地区使用，并保证用户使用性能。
提高绝缘等级,增加电机使用寿命
标准电机采用了F级绝缘结构,从而提高了电机使用寿命,增加了电机可靠性。
高效率
电机采用优化设计,具有较高效率，可产生可观的节能效果。
3、合理的结构设计
灵活的引出线方向
电机接线盒的安装方式可在电机顶部、左侧 、右侧,接线盒自身可旋转安装,71-132机座的接线盒可旋转4*90方向。160及以上机座接线盒可旋转2*180方向。用户在订货时必须标明接线盒及出线孔方向。
美观的电机造型
机座散热筋设计成垂直、水平分布,端盖、接线盒、风罩均为全新设计，外形别致美观。
4、众多的选择满足各种用户需求
加装热敏电阻
加装防尘密封圈
加装加热带
加装防油密封圈
加装注油嘴
特殊轴伸、特殊法兰等各种要求
使用条件：海拔不超过1000M
环温在-20℃-40℃
电压、频率和工作方式
工作电压：220-240V（50HZ）
380-420V（50HZ）
660-690V（50HZ）
440-480V（60HZ）
工作方式：连续（S1）
轴承：日本NSK轴承
M2QAW series of three phase induction motors is a member of the ABB M2000 family with EU efficiency class. The motors are designed and manufactured according to IEC34, IEC72, DIN42673, BS4999, AS1359, GB755, GB10069, and Q/JBQS27. The electrical and mechanical performances of ABB M2QAW motors are excellent.
High efficiency
1.lkw-90kW 2P and 4P, in S1 duty, M2QA motors are among the class 2 of CEMEP-EU standard,saving energy and operating costs.
Voltage ranges of extra versatility
A wide range of voltages can be up to max. 690 V,for 50 Hz and 60 Hz available Reliable windings To ensure long lifetime, the windings are made of the latest available materials in class F protection and temperature rise limited to class B (80k)in
standard motors
Strong corrosion protection
The motors are made to withstand aggressive environ as standard and they are designed for long lifetime. For motors with regreasing possibility ments. They have strong and effective protection against corrosion Bearings with high load capacity
All motors are provided with deep-groove ball bearings, the lifetime is extended. Cast iron motors in sizes 71-250 are greased for life, and those in sizes 280-355 have a regreasing device as a standard.
Low noise level
The M2QA range has been designed with to minimize motors noise levels, by means of improving magnetic and electrical design,
ventilator condition, and structure assembling size and technology.
Additional windings protection
PTC thermistors, them-switches and Anticondensation heaters on request.
Mechanial Design
Totally enclosed fan cooled IP55 Heavy duty design, manufactured from extra corrosion resistant cast iron materials to be used in all kind of environment. The motor is mechanically very strong and robust and as standard designed for additional energy saving through frequency converter drives. Drain holes and plugs as standard in sizes 280 to 355 Flexible cable entry direction Terminal boxes are mounted on the top of the motots, right or left. Terminal boxes of motor size 71-132 can rotate 4x90°,and those of 160-355 can rotate 2x180°.All are easy to refit.
Powerful refit available
The motors satisfy the requirements of a wide range of environments and applications,such as improving protection, insulation level, regreasing facilities, dust-proof, sealing rings, rainproof are available, a full range of options are listed in pages 19-20.
Insulation and insulation classes
According to IEC 60085,insulating materials are divided into insulation classes. Each class has a designation correspondin.q to the temperature that is the upper limit of the range of application of the insulating material under normal operating condition.
The winding insulation of a motor is determined on the basis of the temperature rise in the motor and the ambient temperature.The insulation is normally
dimensioned for the hottest point in the motor at its normal rated output and at ambient temperature of 40℃ .Motors subjected to ambient temperatures above 40℃ will generally have to be derated.
In most cases,the standard rated outputs of motors from ABB Motors are based on the temperature rise for insulation class B.Where the temperature rise is
according to class F,this is specified in the data tables.
However, all the motors are designed with class F insulation,which permits a higher temperature rise than class B.The motors,therefore,have a generous over-load margin. If temperature,rise to class F is allowed,the outputs given in the tables can generally be increased by about 12%.
Temperature limits are according to standards.The extra thermal margin when using class F insulation with class B temperature rise makes the motors more reliable.
|