品牌：HICHINEGROUP
参考资料：http://www.hichinegroup.com 海鑫工业设备（中国）有限公司
M.V.V.聚合物齿轮泵
|
产 品：
|
M.V.V.聚合物齿轮泵MVV
|
|
型 号：
|
VLE.02.950
|
|
品 牌：
|
M.V.V.
|
M.V.V. S.r.l. is a SNIA group company, specialised in the production of gear pumps, spinnerettes and spinning beams for the synthetic and artificial fibre industry.
Located in Vittorio Veneto, in a strategic position between plain and piedmont, the company owns both the soundness deriving from a long history and the typical dynamism of the industry in the Northeast of Italy.
Established in 1942, M.V.V. has found in this active part of the region surrounding Treviso the best conditions to start a specialised mechanical production.
The company was involved from the start in the manufacturing of gear pumps for spinning, at the beginning addressed to the working of Rayon.
The first models of pumps for other synthetic fibres date back to 1950 and, twenty years later the production of finishing pumps started.
M.V.V. has become a reference point on the international market, able to compete with the big Centre and North European companies, thanks to the quality of its working and the active collaboration with the customer.
Today, the company reality is shown by great numbers: we produced above a million of gear pumps for spinning and millions of spinnerettes for the extrusion of filaments for the main chemical fibre industries.
M.V.V.SRL 生产精密计量泵，齿轮泵，用于聚氨酯、粘合剂、清漆和各类液体。 聚合体采掘泵 | 精密泵 | 齿轮泵 | 剂量泵
意大利“M.V.V.“聚合物齿轮泵
M.V.V.齿轮泵可从常压或真空装置中输送或排出高粘度介质。
主要应用于尼龙、聚酯、聚丙烯、聚苯乙烯、聚碳酸酯等纺织及塑料聚合物行业、
也在化妆品、食品及化学行业得到广泛应用。
由于工作在高温、高压及高强度工况下，所有运动部件由高速钢或高温钢加工而成
，必要时作表面硬化处理。
可设置1-16个物料排出口，也可设置加热夹套及温度、压力控制装置。
|
聚合物齿轮泵
|
|
粘度
|
cp
|
1000-40000000
|
|
排量
|
cc/rev
|
0.3-8000
|
|
转速
|
r.p.m.
|
5-60
|
|
进口压力
|
bar
|
0.5- 200
|
|
出口压力
|
bar
|
1-500
|
|
压差
|
Bar
|
300 max
|
|
操作温度
|
°C
|
20-350
|
|
清洗温度
|
°C
|
<500
|
|
旋转方向
|
|
顺时针
|
VLE.02.950
MVV designs and manufactures transport gear pumps to batch fluids at low temperature (max 100°C) which cover a range of capacities that go from 10 to 8000 cc/rev and pressures up to 300 bar.
To guarantee high quality standards, special care is taken to choose materials and treatments (heat and surface treatment) to use during manifacture process, concerning the fluid itself.
According to the Customer’s requests, the pumps can be provided assembled on chassis and with gear motor and control board. Temperature and pressure control instrumentation can be also requested by the Customer.