安徽防腐木厂家的防腐木在户外使用时应注意什么?
1． 户外木材应在户外阴干到与外界环境的湿度大体相同的程度在施工。安徽防腐木厂家的防腐木使用含水量很大的木材施工安装后会出现较大的变形和开裂。
2． 金属连接件必须使用热度锌件，使用不锈钢件。不能使用不同金属件。否则很快会生锈，使木制品结构受到根本损伤。
3． 在制作和穿孔的过程中，应先用电钻打眼然后用螺丝等固定。以免造成人为的开裂。
4． 如果需要使用专用涂料时应注意首先要充分摇匀，然后在木材表面只需涂饰一遍。涂饰后需要24小时的晴天条件，使涂料在木材表面成膜。

1 outdoor wood in outdoor shade to the external environment humidity roughly the same degree in construction. The use of water large timber construction installation will appear larger deformation and cracking.

2 metal connector must use heat zinc parts, preferably using pieces of stainless steel. Never use the different pieces of metal. Or it will rust, so that the wood structure influenced by underlying injury.

3 in making and perforation in the process, should be used to drill hole and screw fixation. In order to avoid the cracking for adult.

4 if you need to use a special coating should pay attention to fully shake, then in the wood surface just finishing again. Finishing needs after 24 hours of sunshine conditions, so that the paint on wood surface film.

安徽防腐木厂家 联系方式：

地址：合肥市徽州大道与繁华大道交叉口向南800米路东（高杨工贸大院内）   
联系人：龚经理   

电话：   

手机：   

网址：http://hfsdjc.ebdoor.com