The kit consists of a flow through μ-Slide, tubes, and adapters for use in flow assays, especially with upright microscopes
Permits easy connection to existing equipment
Well-defined shear stress conditions
Autoclavable tubes and connectors
Ready to use flow setup
Applications:
Analysis of adherent cells under flow conditions
Cell culture under both static and stop-flow conditions
High resolution microscopy of both living and fixed cells
Technical Features:
Large microscopy area and well-defined shear stress calculations
For technical data on the μ-Slides please refer to the μ-Slide upright 0.8
Packing List:
|
1 x μ-Slide upright 0.8
|
|
2 x Elbow Luer Connector
|
|
2 x Connector 1.6 / 3.2 mm
|
|
2 x Silicone tubes; 1.6 mm ID, 3.2 mm OD, 20 cm
|
|
NOTE:
|
|
Choosing the Right Channel for Flow Applications
For flow assays employing the smallest volumes and high values of shear stress:
use a 0.1 or 0.2 mm channel
For wide ranging shear stress values:
use a 0.4 mm channel
For controlling low values of shear stress
(< 2 dyn / cm2): use a 0.6 or a 0.8 mm channel
|
|
|
|
ibidi TIP:
Static Cultures versus Flow Applications
· Low walled channels are more suitable
for flow applications.
· High walled channels are more suitable
for static cell culture.
|
货号
|
描述
|
个/盒
|
报价
|
|
80266
|
μ-Slide upright 0.8 Flow Kit, 1 x μ-Slide upright 0.8, ibiTreat, tissue culture treated, glass window, 2 x Elbow Luer connector, 2 x connector 1.6/3.2 mm, 2 x silicone tubes, 1.6 mm ID, 20 cm, sterile
|
1
|
￥720
|
|
80261
|
μ-Slide upright 0.8 Flow Kit, 1 x μ-Slide upright 0.8, hydrophobic, uncoated, glass window, 2 x Elbow Luer connector, 2 x connector 1.6/3.2 mm, 2 x silicone tubes, 1.6 mm ID, 20 cm, sterile
|
1
|
￥720
|