包头高空塔架的平台钢格板平台钢格板规格1、扁钢间距为30mm的钢格板为工业领域用途最广的品种。在常用钢格板的系列中，对表面冲击具有最强的抵力。2、扁钢间距为40mm的钢格板为最经济、最轻便的品种。在跨距最小的场合下，是最理想的选择。3、扁钢间距为60mm，横杆间距为50mm的钢格板是专为采矿业的应用而开发的品种，它解决了矿物溅落在板面上的难题，常指定用于采矿业的加工厂、转运站、破碎系统的板面。平台钢格板钢格板材料1、扁钢和横杆均采用GB/T700的Q235制造，根据供需双方协议，也可采用其他材料制造。2、扁钢采用热轧扁钢或经过纵剪的热轧或冷轧钢带。3、扁钢尺寸允许偏差符合表一YB/T4001.1-2007的规定。4、齿型扁钢采用热轧扁钢或经过纵剪和冲齿的热轧或冷轧钢带。齿型尺寸在每100mm内不能少于5齿。Baotou sky tower platform steel platePlatform steel grid plate specification 1, flat pitch 30mm steel grid plate for the industry 's most versatile varieties. In the commonly used steel grid plate series, on the surface impact has the strongest attraction. 2, flat pitch 40mm steel grid plate is the most economic, most portable varieties. In the span of the smallest occasions, is the ideal choice. 3, flat pitch 60mm, bar spacing of 50mm steel grid board is designed for the mining industry in the application and development of varieties, which solves the problem of mineral splashed on the surface, often specified for the mining industry processing factory, transfer station, crushing system board.Platform steel lattice plate steel grid plate material 1, flat steel and the cross rod are used GB/T700 Q235 manufacturing, according to the mutual agreement, also can use other materials manufacturing. By 2, flat steel hot rolled flat steel or after slitting the hot or cold rolled steel strip. 3, flat size allowable deviation shall conform to table YB/T4001.1-2007. 4, tooth shape flat using hot rolled flat steel or after slitting and punching of hot or cold rolled steel strip. Tooth size in 100mm each of not less than 5 teeth.