韩国COUPLINGS联轴器 

 A>  Taper Grid Coupling

⑴. Characteristic

   We can get more favorable conicience and cost down by using the WCC Taper Grid Steel Flexble Coupling.

1). PARALLEL

 The movement of the grid in the lubricated grooves accommodates parallel missalignment and steel permits full functioning of the grid-groove action in damping out shock and vibration.

2). ANGULAR

 Under angularmisalignmnet, the grid-groove design permits a rocking and sliding action of the lubricated grid and hubs without any loss of power through the resilient grid.

3). END FLOAT

 Unrestrained end float for both driving and driven members is permitted because the grid slides freely in the lubricated grooves.

It can also be limited th any required amount.

4). TORSIONAL FLEXBILITY

  Torsional flexibility is the ability of Wcc Taper Grid Couplings to torsionally deflect when subjected to normal, shock or vibratory loads, providing flexible accommodation to changing

 B>   Gear Coupling

⑴. Characteristic

  Gear Coupling takes the method of coupling by linking sleeve and Hub With shaft and our gear coupling adoped AGMA method(U.S.A) in manufacturing of gear which is the most imporant in gear Coupling so that we can maintain high quality in product.

1). Light weight, small size, long life and very little loss of transmitting power.

2). It prevents leakage of lubricants by using gasket at the connection point, and it's convenient to set by concavo-convex style.

3). Gear Coupling permits parallel, angular and end floating misalignments by crown gear form of hub tooth.

  * 

 The driving and driven shafts are parallel to each other, but not on the same straight line.

  *

   The driving and driven shafts cross to each other with an angle an the same straight line.

*

  The driving and driven shafts slide sliqhtly each other on the center line.

4). The coupling made of S45C has a good endurance to high speed and peak load and we can use some special materials. 

C>  Disc Flexible Coupling

⑴. Characteristic

1). No lubrication

 Np moving parts are in WCC DISC_FLFX coupling theftore lubrication is not necessary.

2). Maintenance free

 All metal construction and no wearing parts need no maintenance.

3). Simple design, light wieght and high torque

 Two hubs, one center member, one disc pack and several bolts form the basic coupling WCC DISC_FLFX couplings are available in wide range of size to meet variable operation conditions.

4). WCC 

 DISC_FLEX couplings are able to absorb axial, angular and parallel and parallel misalignment.

5). No backlash and high torsional stiffness

 WCC DOSC-FLEX couplings allow no backlash and high torsional stiffness.

6). High performance

 High temperature do not affect the all steel construction.

7). Easy to mount and dismount

 WCC DISC-FLEX couplings have small number of parts and simple construction which allow quick and easy mounting and dismounting work.

8). Safety measure

 When a severe over load may damage the coupling, the transmitting rotation will be posible through over load washer.

D>  Flexible Flexible Coupling

⑴. Characteristic

   When connecting the line shaft, flexible flange coupling has many requirements with siple assembly/disassembly and extemely lowest price.

1). It transmits power smoothly.

2). It has available absorption of shock load and vibration.

3). The power th be pressed shaft from coupling does not occur.

4). It is possible to rotate as directly connected from outside by hand.

5). Easy

6). It can be measure from side as directly connected.

7). It is safely operating without any particular guard cover.

8). Simple construction and completely flexibility.

E>   Jaw Coupling

⑴. Characteristic & Merit

Power is transmitted by a Rubber with superior elasticity

Possible transmit the power fully under misalignment.

Be smoothly transmitted the power.

Low noise and Hight durability

F>   Nylon Coupling

⑴. Characteristic

1). It always transmits the power fully(100%) under parallel, angular, complex misalignment with flexibility.

2). With angular and parallel displacements the reactive forces may be neglected, thanks to the twin cardanic method of operation, and there, are no periodic fluctuations in anfular veocity.

3). Internals have longer life by using special materials.

4). Assembly is extremely simple and time saving, it is simple to mend and exchange parts.

5). Not Require lubrication.

6). Low Noise.

7). Oil and heat resistance.

G>  Rubber Flexible Coupling

⑴. Contents

  Woochang universal joints are designed to satisfy your most difficult engineering challenges.

  Customized for virtually any application, Woochang universal joints are engineered to perform to your exact specifications.

  Our experienced team of product design engineers is prepared to answer any question you may have regarding the Woochang universal joints described in this catalog.

H>  Universal Joints